Shifting Help (Auto)

[HIGH TECH RAM]

My other truck is a 98.5 24v with a full billet Goerend. If I just mash the peddle down The truck sputters (Defuels,Cuts in and out) at 3200 rpm before shifting into the next gear. This only happens at full throttle. If I let off the throttle near redline it will shift just fine. During normal driving the tranny is awesome. It also has a JVD torque enhacer and an edge ez I dont know if this a TPS problem or electronic or if something is up with the tranny

TIA
Chris

 

[Cummins Driver]

Id try adjusting the APPS. I think the 24v's have problems if those are out of adjustment.

Eric

 

[HIGH TECH RAM]

According to the manual the apps sensor cannot be adjusted. Only calibrated.

 

[DART505]

I have the same issues on the dyno,3rd to 4th it goes flat and quits pulling 3200 then after a huge delay it upshifts.All suncoast parts and complete valve body.
WTF?

 

[HIGH TECH RAM]

From what Ive researched so far the apps senser seems to be the blame

 

[BigB82789]

I don't think its a tranny problem. It has to be a sensor somewhere. Time to start swappin in new parts.

 

[Billysgoat]

According to the manual the apps sensor cannot be adjusted. Only calibrated.

Yes and no, you can adjust it for proper voltage using a meter and a few basic tools, look in the how to section for the article big blue wrote up and try that.

 

[HIGH TECH RAM]

Got a link for that billygoat?