sled pulling wieght

ddperformance

New member
Joined
Oct 9, 2008
Messages
103
hey guys new to pulling i was wondering when adding wieght to truck you generaly put all u can on front or some on front and in bed or depend on track conditions ? thanks for any help
 
Yep...all you can. And as close to 60'' as you can get. Put a little more on the drivers side to counter the torque of the engine pulling up on that side.
 
The front ends will take a lot. I have seen 1600lbs or more on the front of a reg cab dodge. Just make sure your weight rack is up to the task!
 
The front ends will take a lot. I have seen 1600lbs or more on the front of a reg cab dodge. Just make sure your weight rack is up to the task!


Yea but I have seen some guys in the 2.8 class start to have axle problems.
 
yeah i run about 1400 up front I cant turn sharp but it looks cool. lol
 
I saw 2200 on a reg cab D-max. Too bad he blew up the drive train and almost polvaulted at mid track!!!!
 
If you Include my 200 pound front bumper I've had 1430lbs on the front. My gap between the blocks and the rear grew 2"!
 
We usually hang at most 1800lbs. on the front of my best friends truck. It is a reg. cab. Thats including about 200lbs. for the bracket.
 
Back
Top