Smarty "hang" on Torque managment 3?

[JasonCzerak]

I toyed around with the smarty a few days ago with higher Torque management settings. 3 is really really touchy. Ever since I went with bigger injectors I've stayed away from this setting due to this touchyness.

Well, after some driving around I found an empty parking lot and did a few test 3rd gear launches. WOW

however, after one try at that the motor took 60 seconds to come down to only 800rpm.

Normal? Ideas of how to fix this?

rail was the normal idle pressure.

TNT/R #9, TM3, timing 3, rail 3, wastegateoff, shift default off (manual)

 

[Howling]

Mine "hung" more on TNTR 9 then TNTR 7 but that is also with the MP8 at 60%

 

[Cuda]

Mine stays on tq4.. drive good with the auto.. only seems to be really touchy and hang more when playing with rail pressure.

 

[bh10]

Mine stays on tq4.. drive good with the auto.. only seems to be really touchy and hang more when playing with rail pressure.

x2 mine was do to the Rail PSI taking its time to come down.

 

[Howling]

TQ 4 is to much fuel down low when running large injectors and dual pumps.