Speed Sensor Problem...NEED HELP!

Smokinrebel

Smokinrebel

New member
Joined
May 22, 2008
Messages
4,141
Installed my airdog 150 yesterday. Dropped tank and installed draw straw. Put tank back in, and buttoned everything up. Truck started fine, but the abs and break lights were on on the dash. Typically this happens when my abs sensor in rear is messed up. So i drove truck this morning that i have NO speedometer, which means no shifting...

Any ideas???

I graduate in 2 weeks and have to get to school....lol so i am super screwed right now.

Any help would be appreciated.

Thanks
Brian
 
go back and check over all of your wiring, especially around the tank area. you could have pulled a wire somewhere.
 
You have a few things to check.See what codes are poping.Check the tranny spd sensor and rear end sensor.Both abs on the front tires.And pinching a wire.The front end is a booger so do that last.
 
I only have rear abs, so thats why i am thinking maybe i knocked a ire loose dropping tank. I checked the abs sensor in rear and it was fine. Connections were fine. I can't really get it anywhere to read codes seeing as i only have first gear. I might have to try and crawl to advanced or something. So i guess i am drooping tank again to see if there are any loose wires
 
You must log in or register to reply here.
Back
Top