Steed speed , JGS external wastegate

spooled05

Member
Joined
Jul 21, 2008
Messages
832
Brand new t-4 steed manifold second gen 24 v a few scratches around mounting as it was bolted up for mock up
720$ shipped in lower 48
0E8CE51D-C7AA-4DAE-A151-F524CDBE778D-22631-0000362F7D2728CE_zpsc51c460f.jpg

D4EAD463-AC2D-41A1-A438-7752BBBF081C-22631-0000362FC32FF437_zps89bd54e9.jpg

50mm JGS external gate brand new
275$ shipped in lower 48
198F3E71-B726-4671-B99E-81D51F919568-22631-0000362FCB11F6F7_zpsac128e50.jpg
 
I have a question on this manifold..

How different is this from a 2nd gen factory manifold in just dimensions?
I have a stock/s475 twin setup on my truck that uses a 2nd gen manifold. Would this bolt up in replacement of the factory manifold? or would it shift everything out away from motor? Hard to tell from photos

Thanks,
 
Not to hijack thread but it is a t4 manifold a stock charger will not bolt to it. I compared a steed and stainless
Side by side and both appeared to be the same as far as where the turbo would sit with factory 2nd gen. If it is in a different location the movement would be minimal. If you have a mount on the nitro
Turbo it should also still work, should.. Just my own experience.
 
Just so everyone's clear both of these are sold , mods please deleat this thread
 
Back
Top