Stock Exhaust Manifold, t3/t4 adapter FS!

NickTF

NickTF

Single turbo turd.
Joined
Jun 4, 2007
Messages
5,887
I just removed my stock manifold to replace it with Bodie's header. The stock manifold is drilled for two 1/8" npt fittings, one is in the divider for drive pressure/wastegate and the other is in the middle of the flange port for number 6-4. No cracks, has about 110k on it. $100 takes it.

Have the t3/t4 adapter that came with my turbonetics t66 turbo. Don't need it as my header has a t4 flange. The adapter has two 1/8" npt ports with allen head plugs right from turbonetics. Will $100 obo takes it.
 
Could you check the size of the adapter I think I have a t-4 turbo but I'm not positive!
 
What particular dimension are you looking for? Centerline of each bolt hole to the other?
 
Stuff is still for sale!

I will get on the measurments sorry thekidfan
 
3 5/16" x 2 1/4" from centerline to centerline of bolts is what I ended up with sorry for the delay in reply.

Stuff needs to move make an offer!
 
NickTF said:
3 5/16" x 2 1/4" from centerline to centerline of bolts is what I ended up with sorry for the delay in reply.

Stuff needs to move make an offer!
Click to expand...

2 3/4"x 3 1/4" is what I got! Wonder what the heck this is??

Thank you for checking!
 
THEKIDFAN said:
2 3/4"x 3 1/4" is what I got! Wonder what the heck this is??

Thank you for checking!
Click to expand...

Not sure. I know the adapter I have is a t4 as the header I ordered has a t4 flange on it and the t66 bolted right to it! Good luck man!
 
You must log in or register to reply here.
Back
Top