NickTF
Single turbo turd.
- Joined
- Jun 4, 2007
- Messages
- 5,887
I'm going to step up to a custom charger from ED that's a bit larger then the turbonetics unit. I need to move this charger and intake system in about 3 to 4 weeks from today.
The turbo is a turbonetics t66: 66mm inducer compressor/68mm exducer turbine wheel, .84 a/r divided t4 turbine housing with 4" v-band outlet. A few pics of the charger as part of the header install. Can get more pics if needed. Charger has about 8k on it with no shaft play and will come with oil line needed to adapt. If needed I can send the stock discharge tube with it that goes to the intercooler (just the elbow portion) as the new charger won't be using it. Any questions feel free to ask. $1100 shipped firm.
Here's a pic of the AFE setup. It's a link to my myspace page so if it doesn't show let me know. The t66 is also seen in this pic. It has the progaurd 7 filter which has a large 6" intake for maximum air flow! Missing one allen bolt which holds the top of the air box down. Only selling because the larger charger won't be able to use this setup, i've been nothing but happy with it and picked up 8psi of boost over the previous amsoil 4510 bhaf setup.
http://viewmorepics.myspace.com/ind...dID=23123789&albumID=1529715&imageID=41448194
$300 shipped.
Let me know if you have any questions on this thread or via pm. Thanks.
Nick
The turbo is a turbonetics t66: 66mm inducer compressor/68mm exducer turbine wheel, .84 a/r divided t4 turbine housing with 4" v-band outlet. A few pics of the charger as part of the header install. Can get more pics if needed. Charger has about 8k on it with no shaft play and will come with oil line needed to adapt. If needed I can send the stock discharge tube with it that goes to the intercooler (just the elbow portion) as the new charger won't be using it. Any questions feel free to ask. $1100 shipped firm.
Here's a pic of the AFE setup. It's a link to my myspace page so if it doesn't show let me know. The t66 is also seen in this pic. It has the progaurd 7 filter which has a large 6" intake for maximum air flow! Missing one allen bolt which holds the top of the air box down. Only selling because the larger charger won't be able to use this setup, i've been nothing but happy with it and picked up 8psi of boost over the previous amsoil 4510 bhaf setup.
http://viewmorepics.myspace.com/ind...dID=23123789&albumID=1529715&imageID=41448194
$300 shipped.
Let me know if you have any questions on this thread or via pm. Thanks.
Nick
