Tires?

P

pyro07

New member
Joined
May 12, 2010
Messages
138
what size do you have on your 1st gen I have 245/75R16's on mine but they seem slightly small they are what were on the truck when I got it and they dont quite seem right and I cant find the factory size anywhere? I was also wondering what is the largest size I can clear on the factory height?
 
235/85/16 (stock) before and 285/75/16. No lift. The 235's were good and i was going to keep them that size but got new/used 285 and wheels for cheap. I believe the 285/75's are 1" taller than the 235/85.
 
i have 305/55/20 on my 92 and they barely scrub with the front end leveled out. with a block under the front 295's would be no problem and fill wheel well great.
 
Have new 2inch lift springs on front rear is stock and clear 33x12.50x16.5s no problem on my 92 250 diesel 4x4
 
It should say the stock tire size on the tag inside the door that lists the manufacturing date and stuff. I have 285/75R/16s on mine and they don't rub, and I am at stock height. I really like them and they make the truck look much better, I've tried 35"x12.5" on and they will rub in the front with no lift.
 
i have 33x13s with no level, no lift...also running no fender flares, with the stock flares my 305/70/16 fit my dads bone stock 93
 
33x12.50x16.5 ......no lift


P5290281.jpg





Dar
 
VERY clean farm boy, I'm struggling to find even 1 decent firsty on the west coast.
 
You must log in or register to reply here.
Top