torque specs

[02 dodge4x4 5.9]

anyone could tell me the torque specs on my headbolts figured id retorque them while valve cover is off trhanks

 

[Billysgoat]

75ftlbs + 1/4 turn

OR

125ftlbs and work the bolts out till they do not turn any before the wrench clicks beeps or buzzes. If you want to take the time, try the following by removing one bolt at a time.

Take each bolt and apply a light coat of high temp grease to the underside of the bolt head and to the threads. Starting in the middle of the block and alternating rows towards the front and back torque all bolts to 25ftlbs, then 50, then 75, then 125ftlbs. Once all bolts are at the initial 125 go back over in the same manner until the wrench just clicks and the bolt does not turn at all. All in all it will take about an hour and a half to do this and you will have some sore shoulders to show for it LOL

 

[02 dodge4x4 5.9]

got it thanks bro