Track Bar

Smokin Smitty

"dumbass"
Joined
Dec 17, 2009
Messages
272
I know there are lots of threads about this subject, but none for what i need to know.
Im in need of replacing mine and have been looking around. I can get a slight discount at napa, so i was thinking about their track bar. Is it worth a chit?
Or should i go MOOG?
I dont see a need for a 3rd gen track bar cause buy this fall the truck will no longer be my DD.

Thanks, Smitty
 
If you get the cheap NAPA it is MOOG, the NAPA line is a beefier part made by MOOG for NAPA.
 
i put one on my last 01 i had...it worked fine untill i sold the truck (6 months later)
 
The cheap ones at Napa are NOT Moog. I have put a few on and also actual Moog lifetime ones from Carquest where I work and they are totally diferent. Moog are good and when they get loose you take it off and exchange for a new one. Also the Raybestoes brand are not too bad either. They are also sold at Carquest and they are lifetime and also warranty covers the cost of labor replacement from the shop that originally installed it.
 
If you are going to keep the truck, go with a 3rd gen and be done IMHO.
 
I would put a Thuren on, way beefier then a third gen. comes with life time joint

If you look in the third gen section you will see that they have problems with the third gens as well.
 
Back
Top