Trade S400 for S300

Status
Not open for further replies.
Got Smoke?

Got Smoke?

New member
Joined
Oct 8, 2006
Messages
4,728
I have an S464 turbo I would like to trade for an S300.

I bought this turbo in Feb/March and it has about 6 to 8 pulls on it.

Nothing wrong with it I just need to go back to an S300 because I'm 3.55 geared. No lies to tell I just don't want to spend the time/$$ to swap whole axles.

I will include the Cummins elbow and downpipe for the S400. I will need your DP for your S300. Would like either a 64 or 66 S300 not interested in any 62mm's.

Thanks!
 
Last edited by a moderator:
Oh I forgot to include you will get the oil feed adapter and T3 T4 adapter needed to make it completely bolt up.
 
You could PM a moderator and see if they will remove your "G's" The G denotes a 57mm std S300.

What is the charger doing or not doing that is forcing your decision? What size tire? What gear are you trying to hang?
 
Does the 400 have a waste gate on it? I have a 300 but its the top out of a BD twin set and I think its smaller than what you want .....
 
Twisted shifter, no its not wastegated. See if you can find out the specs on it for me.
 
The mod # on the tag says S300G071 I think its 57.1 on the inducer and 71 on the exhaust. This thing has less than 10 miles on it and 5 passes at the track.
 
What are the specs on this? I have a ball bearing Turbonetics 66/14 I might be interested in trading?
 
95, I will PM you shortly.

I will sell this turbo, adapters, and downpipe outright for $900 PLUS shipping also.
 
All PM's replied to and any requested info PM'd as well. Bump ttt for good deal for someone.
 
Here's a couple of pictures for the guys that are asking.

SmokinGoat04 and I are currently discussing a trade so the turbo may be spoken for, but I posted these just in case.
 

Attachments

  • S4001.JPG
    S4001.JPG
    53.9 KB · Views: 72
  • S4002.JPG
    S4002.JPG
    54.4 KB · Views: 90
  • S4003.JPG
    S4003.JPG
    39.4 KB · Views: 52
Status
Not open for further replies.
Back
Top