tranny cooler

[jtinlbc]

whats happening people
tommorrow Im gonna do a 6.0 tranny cooler on my older brothers 7.3 powered pickup
does anyone know of a write up on this mod
for fitting sizes and such
as well as step by step

 

[jtinlbc]

ok so you need 4 feet of 1/2 inch transmission hose
(2) 3/8 to 1/2 inch barbed fittlings
and six hose clamps

step 1
remove grill
step 2
loosen power steering cooler and move out of the way
I let mines dangle
step 3
loosen a/c condenser
step 4
remove stock cooler
step 5
attach fitings to hose
step 6
attach hose to tranny lines
step 7
mount new 6.0 cooler using stock hardware
step 8
cut transmision hose to fit and install using clamps
step 9
tighten condenser
step 10
remount and tighten powersteering cooler
step 11
re install grill
step 12
check for leaks and tighten as necessarry
clean up and have a beer or 10

there you go
the 12 steps to a cooler 7.3 tranny :bang