trans advice, od section

[12vriviera]

What are you guys using to align the od section while pressing it together? I found a miller tool, and some use a cut up intermediate..
I miner of don't have time to order atool and i for sure don't have an extra intermediate shaft, anything else i can use?

 

[Craig_C]

Not really. You can try and line them up and hope they dont move, but if its not lined up about perfect you will never get the od housing back on

 

[12vriviera]

I got a call in to someone that might have one.. I figured ifi didn't get one i would use my intermediate while lining it up to press, if it fits through there...

 

[Hurley]

I did mine without a tool (and cannot for the life of me remember how). I'll reply when it comes to me

 

[12vriviera]

Thanks!

 

[Craig_C]

I always build the OD section first so i can use the intermediate shaft from the trans Im working on.

 

[Hurley]

I always build the OD section first so i can use the intermediate shaft from the trans Im working on.

I'm 99.9% sure that's what I did; the other 0.1% would be that I used something with a flat shoulder to tweak the alignment and test fit.

 

[12vriviera]

The Call i had in came through, getting the tools in the morning! I hope it works!