Trans cooler

Hoss24v

Hoss24v

New member
Joined
Feb 3, 2013
Messages
56
Hey guys! I'm in the middle of redoing my trans and I want to get a new cooler, preferably one with an electric fan and one that I would be able eliminate the factory cooler In front of the radiator and the aux one under the turbo. An what should I use for lines, my stock ones were rubbing together at one point and started to chafe and I want to replace them and have a clean look and be a hack job. Any input would be appreciated, thanks!
 
1/4 npt to -8 fittings in the tranny. -8 quick lock rubber hose (black or blue high temp oil resistant) on an barb fittings.
I'll get you some part #'s of what i use.



Sent from my fphone
 
Cooler:
http://www.summitracing.com/parts/der-15870

Trans fittings (2 of these):
http://www.summitracing.com/parts/sum-220848b/overview/

Hose end fittings (you'll need a 45 degree bend and you can use a straight for the other one):
http://www.summitracing.com/parts/rus-624173/overview/
http://www.summitracing.com/parts/rus-624023/overview/

Hose:
http://www.summitracing.com/parts/sum-220788-b/overview/

This is similar to what i have done. You might want a 45 or 60 degree on the fittings from the tranny depending on the routing of the hoses you will want. Also about 20 feet should work for two lines and the cooler.
 
Last edited:
You must log in or register to reply here.
Back
Top