ridejad
New member
- Joined
- Feb 6, 2013
- Messages
- 93
All parts are being shipped out of Allendale mi, I work 8-5 Monday-Friday so it might take a couple days to get stuff shipped out!
FEEL FREE TO CALL/TEXT FOR FASTER RESPONSE 24897829fivenine
Htt 66 turbo, has some play, came off a running and driving truck, rebuild wouldn't hurt it, Wastegate actuator is mia, mount is still there though wired shut-1000 you pay the ride
Triple disc goerend converter, bought it on here years ago sent it back for inspection/cut/clean kept it around as a spare/back up but running an omega setup now so it doesn't do me any good stall is ~2000, 600 you pay ride
Injectors (vp44 pop 24v) came from a engine haisley built years ago, they are 7x12 sac made 589 fuel 742 spray in my truck currently still in my truck but have 6x18s I am gonna install in the next few days I've put just about 20k on these without a single issue-325
Injectors (vp44 24v pop psi) they are the old mach 7 injectors which are 7x10 vcos they made 575 fuel 696 spray, I had one injector go bad (#4 have all them in labeled bags) I didn't see any cracks but I would think if it had a new nozzle installed and popped in sure you would be on the road-285
Stock 94-98 pistons need a good cleaning -150
Stock 98.5-02 pistons, couple are excessively dirty but I would think they would clean up still-100
6.7 pistons quick cleaning they would be good to.go - 275
6.7 rods-125
12v Brazil rods-175
Trades-dana 80 spool, full cuts, 37 spline shafts, drive psi gauge, 100psi mechanical boost, s595, hx82, carillo rods, 13mm pump,
FEEL FREE TO CALL/TEXT FOR FASTER RESPONSE 24897829fivenine
Htt 66 turbo, has some play, came off a running and driving truck, rebuild wouldn't hurt it, Wastegate actuator is mia, mount is still there though wired shut-1000 you pay the ride
Triple disc goerend converter, bought it on here years ago sent it back for inspection/cut/clean kept it around as a spare/back up but running an omega setup now so it doesn't do me any good stall is ~2000, 600 you pay ride
Injectors (vp44 pop 24v) came from a engine haisley built years ago, they are 7x12 sac made 589 fuel 742 spray in my truck currently still in my truck but have 6x18s I am gonna install in the next few days I've put just about 20k on these without a single issue-325
Injectors (vp44 24v pop psi) they are the old mach 7 injectors which are 7x10 vcos they made 575 fuel 696 spray, I had one injector go bad (#4 have all them in labeled bags) I didn't see any cracks but I would think if it had a new nozzle installed and popped in sure you would be on the road-285
Stock 94-98 pistons need a good cleaning -150
Stock 98.5-02 pistons, couple are excessively dirty but I would think they would clean up still-100
6.7 pistons quick cleaning they would be good to.go - 275
6.7 rods-125
12v Brazil rods-175
Trades-dana 80 spool, full cuts, 37 spline shafts, drive psi gauge, 100psi mechanical boost, s595, hx82, carillo rods, 13mm pump,
Last edited:
