It begins cutting out, then just dies. if i wait a minute it'll start right back up. its been doing it for a while. I just put on a raptor 150 lift pump, and a new stock vp44 pump. it runs fine then it'll start cutting out. i scanned it and i got codes. p0122 p0230 p1689 p1690. i know what these code are but idk how to fix it. i tried clearing them, but when i start it they all come back. any suggestions???
truck continues dying
- Thread starter Foster
- Start date
BgBlDodge
Hates hippies
- Joined
- May 7, 2007
- Messages
- 16,647
P0122
Accelerator Pedal Position Sensor Signal Voltage Too Low
P0230
Transfer pump Circuit Out Of Range
P1689
No Communication Between ECM & Injection Pump Module
P1690
Fuel injection pump CKP Sensor Does Not Agree With ECM CKP Sensor
Sounds like maybe a crankposition sensor or maybe something electrical. Double check the harness on the back of the injection pump to make sure it's latched on securely and that none of the wires on the inside of the plug are damaged.
Accelerator Pedal Position Sensor Signal Voltage Too Low
P0230
Transfer pump Circuit Out Of Range
P1689
No Communication Between ECM & Injection Pump Module
P1690
Fuel injection pump CKP Sensor Does Not Agree With ECM CKP Sensor
Sounds like maybe a crankposition sensor or maybe something electrical. Double check the harness on the back of the injection pump to make sure it's latched on securely and that none of the wires on the inside of the plug are damaged.