truck wont start help plz

C

cumminspower97

New member
Joined
Apr 24, 2011
Messages
114
ok guys got a cummins with edge att hot unlock to start it off about two weeks ago i was going down the road went to go from level 0 to level six when i did the truck cut off and took forever to start it showed this code p0628 fuel lift pump circuit low voltage. now i got a airdog 150 so i thing its reading my old pump maybe
well next last night me and a friend was coming back from looking at a truck we stoped to eat truck was doin fine we had been about 360 miles well we went ahead and got some diesel truck was fine when i truned it off as soon as i start it back it sounded bad like it had a tick from the motor and it was missing and i called around everyone said bad fuel i put some stuff in it but still didnt fix it i checked the oil water and everything checked out good no lights was come up on the dash so i said maybe we can get hope we was about two hours away well i truned the edge off the truck had the same power as before just a missing sound about 50 miles down the road i heard something so i truned the truck off and pulled over after that mine friend got out to look when i started the truck it white smoke like crazy and smell like raw fuel i truned it off called a friend to come get me when he got there we was going to try to start the truck so i could pull it on the trailer but it wouldnt start it would just trun over and over so today i look at its showing to codes a p0633 skim key not progammed in pcm and a 0628 fuel lift pump circuit low voltage so i called dodge, diesel shops, and edge
i want to thing its a injector but it show a code for it dodge said i need to have my pcm flashed that it could fix it but not sure truck has 163 miles any help would be great thanks
 
Take the edge off completely and see what happens.
And use a period every now and then...that was almost impossible to read.
 
If it cranks and wont fire it is something fuel related. Check the oil for starters. Is the motor wet? Check the #4 injector line and all fuel line connections.
 
ok sorry guys. I was in a hurry when i was doin that. I have took the edge off and it still wont start. the oil is fine, water is fine, the motor is not wet at all. I am thinging its the injector. people say if it is white smokin it could be a injector. I am try to pull the injectors out and get them checked out. Anyone know if a good place to get them checked.
thanks tyler
 
Where are you located, there are many shops around the country that can check CR injectors.
 
You must log in or register to reply here.
Back
Top