tuning help anyone

cummin get it

cummin get it

coal train
Joined
Sep 13, 2009
Messages
1,267
i recently did most of the work to my truck that i have listed and i notice with the smarty on and water meth on it hits about 55psi n really throws me n the seat. When i turn the quadzilla on it looses power on all stages any ideas????
:bang
 
im thinkin its that or that chip doesn't work with a hrvp. Has anyone heard of someone running the hrvp with the adrenline?
 
k ill see wat i can do maybe put up some before and after videos of this chip and ill get a new one and go from there.
 
sent the quad in today so ill find out by next tuesday if there was something wrong with the chip or not.
 
got the chip back today they changed a few things "I added all the latest firmware for surging and fuel pressure to this board along with the inductor and I also whanged a part on the circuit board. I updated the board with the latest torqu tune ADR2_TORQ" this was in the package from quad. Hooked it up had SMARTY on #9 and started with the quad on #0. Got it running about 50psi of boost and started turning up the quad to 1,2,3.. all the way to 10 and same problem it looses power and boost(down to 38psi). Then i turned the SMARTY down to level #8 and repeated what I did up above. Same issue. FYI the difference between SMARTY #8 and 9 is just timing. I have yet to turn the SMARTY to level #2 and try again(FUEL AND BOOST ONLY) but im sure it will be the same. So with that said is it time to yank the vp and get it looked at even though there is a visible wire tap which will prob f me? any ideas would be great.
 
cummin get it said:
got the chip back today they changed a few things "I added all the latest firmware for surging and fuel pressure to this board along with the inductor and I also whanged a part on the circuit board. I updated the board with the latest torqu tune ADR2_TORQ" this was in the package from quad. Hooked it up had SMARTY on #9 and started with the quad on #0. Got it running about 50psi of boost and started turning up the quad to 1,2,3.. all the way to 10 and same problem it looses power and boost(down to 38psi). Then i turned the SMARTY down to level #8 and repeated what I did up above. Same issue. FYI the difference between SMARTY #8 and 9 is just timing. I have yet to turn the SMARTY to level #2 and try again(FUEL AND BOOST ONLY) but im sure it will be the same. So with that said is it time to yank the vp and get it looked at even though there is a visible wire tap which will prob f me? any ideas would be great.
Click to expand...

Are you using revo software with the smarty?
 
no im using it straight out of the box today im going to turn the smarty to #2 and then completly off and see if the quad makes more power by itself to.
 
Just took it out for a spin with Smarty all the way up water/meth, quad off=55psi n hauls a$$. Sama as above except i go through all the stages on the quad and it instantly looses power. Tried Smarty on #2=same. Turned smarty off water on no quad got about 40psi. Still smarty off water on and go through the levels of the quad and it does the same lose of power. So with that said anyone want to buy a Quadzilla Adrenline wire harness is for an 01 400 shipped.
 
cummin get it said:
Just took it out for a spin with Smarty all the way up water/meth, quad off=55psi n hauls a$$. Sama as above except i go through all the stages on the quad and it instantly looses power. Tried Smarty on #2=same. Turned smarty off water on no quad got about 40psi. Still smarty off water on and go through the levels of the quad and it does the same lose of power. So with that said anyone want to buy a Quadzilla Adrenline wire harness is for an 01 400 shipped.
Click to expand...

Download the mildest tune for the ADR and see what happens, mine ran the hardest on the 1000 tune. Good luck.
 
I've played around with the revo software on smarty a lot, and I've found that running higher programs with increased duration and timing leave my truck feelin like an old gasser motor, with carburetor floats set too low. Like stated above use the ADR to make the majority of your electronic power and make subtle changes with the smarty to dial it in.
 
You must log in or register to reply here.
Back
Top