turbo bolts

[fluty118]

does anyone know the tread size and pitch on the bolts that hold the turbo to the manifold thanks

 

[Scooter's Roofing]

they aren't bolts. they're studs.

M10 x 1.5

 

[coon smile]

last time i checked i noticed 2 bolts and 2 studs

 

[WUnderwood]

last time i checked i noticed 2 bolts and 2 studs

I concur

 

[coon smile]

A 12v has 4 studs, a 24v has 2 studs and 2 bolts, all M10x1.50.

*noted*

 

[Scooter's Roofing]

I concur

check again 12v boy

 

[fluty118]

thanks for the replys but i also have 2 studs and 2 bolts but im going to have to pull the studs out for my adaptor plate and replace them with allen headed bolts

 

[Scooter's Roofing]

aftermarket manifold?

 

[fluty118]

nope stock manifold

 

[Scooter's Roofing]

well, I've seen a lot of 12v's, and I've never seen one with two studs and two nuts

 

[Tate]

The 2k engine I picked up has 2 studs in the manifold and 2 studs (not bolts) in the turbine housing. Its the one with the wastegate actuator on the compressor housing (HX35). Both of my 98's, as well as my 94 have four studs in the manifold.