Ghostman
24v crazy
- Joined
- Aug 24, 2012
- Messages
- 2,819
Have Hamilton 110# valve springs for 24v. New never ran. Installed on the head, but changing route so taking off and selling for a different setup. $300 shipped.
Selling compound setup and both turbos.
Super B: spring gate, ported both waste gate holes, full 90° sweep of waste gate arm, modified w/g cover plate to allow full movement, turbine housing has been gasket matched. About 15k miles on it. Asking $1050 shipped.
GTA4202: fresh rebuild, new Garrett 7/7 billet compressor wheel, turbine housing gasket matched and divider has been knife edged. Compressor cover has been polished and turbine housing painted with VHT black. Forced inductions cut the compressor cover for the billet wheel and balanced the assembly. Has 1.15 A/R housing with a spring gate.
Both turbos are in good shape. No damage to either ones.
The compound setup I built has the secondary bolted directly to the stock oem manifold. The primary hangs off a bracket I built that bolts to the last three top manifold bolts. The hot pipe is very short with stainless diesel t-6 flange and hx40 flange. I will include the longer bolts for the manifold. The setup was optionally built with an a/w inter stage cooler, but I can build a regular cold pipe for it. The secondary has a v-band welded to the intake. I will include the intercooler pipe and the exhaust outlet stub for the primary. Also will include all new clamps and boots. No drain tubes or oil feeds, you will need to supply those. Asking $500 for piping.
I can make a deal if someone wants the whole setup.
Txt me at 979-450- one five eight five for pictures and more info.
I'll post some pics soon
Sent from my iPhone using Tapatalk
Selling compound setup and both turbos.
Super B: spring gate, ported both waste gate holes, full 90° sweep of waste gate arm, modified w/g cover plate to allow full movement, turbine housing has been gasket matched. About 15k miles on it. Asking $1050 shipped.
GTA4202: fresh rebuild, new Garrett 7/7 billet compressor wheel, turbine housing gasket matched and divider has been knife edged. Compressor cover has been polished and turbine housing painted with VHT black. Forced inductions cut the compressor cover for the billet wheel and balanced the assembly. Has 1.15 A/R housing with a spring gate.
Both turbos are in good shape. No damage to either ones.
The compound setup I built has the secondary bolted directly to the stock oem manifold. The primary hangs off a bracket I built that bolts to the last three top manifold bolts. The hot pipe is very short with stainless diesel t-6 flange and hx40 flange. I will include the longer bolts for the manifold. The setup was optionally built with an a/w inter stage cooler, but I can build a regular cold pipe for it. The secondary has a v-band welded to the intake. I will include the intercooler pipe and the exhaust outlet stub for the primary. Also will include all new clamps and boots. No drain tubes or oil feeds, you will need to supply those. Asking $500 for piping.
I can make a deal if someone wants the whole setup.
Txt me at 979-450- one five eight five for pictures and more info.
I'll post some pics soon
Sent from my iPhone using Tapatalk
