Twin Piping

[wideopen]

Do you guys build your own? Or where do you get the piping?

 

[tony597fitter]

I'm doing mine all out of Polished stainless steel. I am finishing ordering the parts as I type.

You can get parts from source Automotive, airFlo, just about any big rig shop too.

 

[WUnderwood]

Source Automotive, or custom made

 

[wideopen]

Cool Thanks

 

[TURBOLVR]

Vulcan compound turbo components, FireBall injectors, DrawStraw™, Big Line Kits, VP silicone boot kits, gauge installation components, metric adapters brackets, harnesses, AFE, Diamond Eye, Parker fuel line, South Bend, installation, pop testing, o-ringing.

 

[Bponci]

I build all my own custom pipes steel, alum and stainless.

 

[jlibert]

When I looked into getting twins, I checked out BD, MPI, II, and source automotive.

Source's kit was by far the best of the 4. The kit went together just like it should, without any grinding or fitting. The bottom mount for the turbo is built like a tank, and the primary to secondary piping is all one size -- not stepped down and then stepped back up like some of the other kits.

Do your homework before you make a big purchase like that.

 

[Texas Cowboy]

We used 4" prebent steel pipe from a Big truck shop. Work very well and saved money.

 

[wideopen]

Thanks guys, just getting my sources together.

 

[7inchstack]

texas cowboy: may i ask..why such big piping?

 

[PRattenbury]

I built some of my own. Not hard, really.

 

[Texas Cowboy]

Fits perfectly in line with the intake of the primary and secondary. Don't need to frabricate any necked down and up pieces.

 

[impmouse]

http://www.stainlessdiesel.com/10301.html

 

[carcrafter22]

I build my own.

 

[tony597fitter]

I build my own.

HY35 thats got to choke out fast!

 

[gwhammy]

Read a little closer,3.9 isuzu. Probably a good turbo for it on the top. I build my own, the first set took a while. They are easy once you do it for a while.

 

[coon smile]

a few guys on this site turned me toward a truck supply that sold "imperfection steel" for a very discounted price...$10/elbow. i walked out with enough 4" & 5" exhaust elbows to make the cold pipe and intake tube for around $70 (bought a couple extra for misc. parts)

 

[dzlfarmboy]

I really like the 3.5" Slip fit elbows from www.airflo.com if you get 3 tight radius id/od elbows and about 6" piece of straight pipe and a 3.5"-3" reducer it all fits together perfect once you trim the ends a little.

 

[12vchevydually]

a few guys on this site turned me toward a truck supply that sold "imperfection steel" for a very discounted price...$10/elbow. i walked out with enough 4" & 5" exhaust elbows to make the cold pipe and intake tube for around $70 (bought a couple extra for misc. parts)

That bin is your friend! I have dug through that thing more then once.LOL

 

[wideopen]

a few guys on this site turned me toward a truck supply that sold "imperfection steel" for a very discounted price...$10/elbow. i walked out with enough 4" & 5" exhaust elbows to make the cold pipe and intake tube for around $70 (bought a couple extra for misc. parts)

That bin is your friend! I have dug through that thing more then once.LOL

A Pm'd link would be good.