twin reccomendations

T

tedbuido

kwitchurbichin
Joined
Jun 7, 2008
Messages
145
i was just wondering what would be a good charger to pair with a super phat shaft 66 just wondering for future reference Dave
 
A 66mm is to small for the primary and if you use it for the secondary you will have a HUGE twin set.

a 66 pairs with an S488 would flow 1100HP worth of air I would think.

Lavon
 
tedbuido said:
i was just wondering what would be a good charger to pair with a super phat shaft 66 just wondering for future reference Dave
Click to expand...

trade the 66 for a smaller chager like a 62/71/13ss...but i guess it depends what you are going to do with the truck
 
a stock charger over a 66mm will only cool about 500HP, you can make more but with the tiny stock charger, you'll be making HOT air after about 450HP. It would be an excellent 400HP towing setup.

Lavon
 
depending on how much fuel you have i would sell the 66 and get a 62 and put an s475 under it.
 
a stock charger on a s400 what would that be good for on the hp scale. Guessing a good 500 hp but blowing alot of hot air after that,
 
QUOTE=Ultimate Diesel;702952]We made 976 on that setup.[/QUOTE]

With a stocker s400 setup? You had to have used an external gate and lots of :nos:
 
if i was to pair it with a s475 or s480 i'm guessing i would have a lot of lag ? as of right now i don't have the nozzles in yet and i can spool that 66 fairly quick it notice a little more lag then the stocker but once it hits about 12lbs of boost it wants to go
 
What about a 66 over a 74 for a racing setup? Are they to close together in size or would it work for just drag racing not a dd.
 
You must log in or register to reply here.
Back
Top