Twins, CP3's, Flux, MP-8, South Bend dual disk, more

jlibert

jlibert

New member
Joined
Jun 28, 2007
Messages
3,454
I’m building a 12 valve, so all the parts from my 04.5 are being sold. If anyone is interested in a package deal, I'll work something out for you. Parts have less than 1,000 miles on them. Buyer pays actual shipping costs via UPS. PM if you need my phone #.
Thanks,
J.P.

I need a 5" downpipe for an 04.5, so I'll consider one in trade.


04.5-07 FLUX 4 (200hp) nozzles from F-1 (Don M)
Nozzles have less than 1000 miles on them, and always ran with 2 micron filtration.
Would like good stock nozzles in return, willing to work with you if that is an issue. $950

TS MP-8 (04.5-07)
Perfect condition, adjust pressure to exactly where you want it.
$300

ARP 625 Studs (03-07) SOLD!!! Thanks bbbxcursion!!!
Perfect condition, less than 1000 miles, comes with nuts and washers.

Quadzilla Digital Rail pressure gauge(03-07) SALE PENDING...
Super easy plug and play install, no special pod required.

South Bend Dual Disk, sprung-hub Clutch for NV5600(reverse up and to the right)
Less than 1000 miles, extremely quiet for a dual disk, pm for more info. 3850dd12cbsp.
$1200.

TWIN TURBO KIT (upgraded primary and secondary chargers from standard kit)
Source Automotive’s twin turbo kit is the best kit in the business. Will fit 03-07. I did my homework before buying! (better, beefier kit than anyone out there—the bottom turbo mount is built like a tank, the piping is all constant diameter, not necked down then back up like the other kits, all powdercoated) HTT 64/14/71 over S480. Big enough to make big power and cool egts, but still ok for daily driving. Comes with everything needed to install including HTT exhaust manifold, both turbos, intake, all piping, drain lines, filter, and 5” downpipe. Setup tuned by Brown’s diesel. Made 806 uncorrected hp with conservative injectors. Will do 900+ with bigger injectors. Less than 1000 miles. Only selling to buy a second gen twin kit from source auto… $4500.
SOURCETWINSINSTALL086.jpg


5.9 Dodge CP3. Great condition, low mileage, was used in my twin pump kit. $400

6.7 dodge CP3. Great condition, stock, straight from John at Floor it diesel. Less than 12k on pump. $400. This pump will work on a 5.9 engine as long as you have an aftermarket fuel system (fass, gdp, airdog, raptor, etc).

Billet Fuel Filter Lid
Running high pressure from a fass or airdog lift pump? This billet lid wont crack like the stock plastic piece. Easy install. Has port for fuel pressure gauge too! $75
 
would u be interested in selling the twins minus the 64??? already running one on my truck. thanks Tyler
 
Ts Mp-8 (04.5-07)

Could you get some more info on the TS MP8. Don't know much bout them. Running a Predator railbox right now with smarty. How will it work with a smarty?
 
mp-8 is pressure only, no timing -- so it stacks well with a smarty. Unlike many other pressure boxes, the mp8 is fully adjustable with the turn of a knob. You can adjust from 0-100% to get rail pressure right where you want it.

-jp
 
You don't happen to have that twin pump kit around there you would be willing to sell do you??
 
You pretty firm on the 950$ for the flux 4's? I wanna upgrade to bigger and get rid of these flux 2's. Let me know if there anything we could work out.
 
Here are the pics some of you have requested-- they were taken when I installed the kit on my truck.

Thanks,
jp

HTT manifold,
SOURCETWINSINSTALL013.jpg


5" downpipe,
SOURCETWINSINSTALL009.jpg


Pop off valves,
SOURCETWINSINSTALL007.jpg


S480 with mounting bracket, drain line, and hot pipe installed.
SOURCETWINSINSTALL018.jpg
 
Bump for the day. Come on guys, look how cheap everything is going!!! I've seen all this stuff in person, looks cherry.
 
Twin Turbo kit, DD Clutch, RP Gauge, and studs have been sold.



Still have:
Flux 4's
MP-8
5.9 CP3
6.7 CP3
billet filter lid

I'll try to get pics of the remaining items by tomorrow sometime

Thanks guys,
jp
 
MP-8 and Flux 4's that cheap, yet nobody is biting? Whats the deal guys? MP-8 is adjustable on the fly with the knob.

As for CP3's, I know a lot of you guys buying dual CP3's need a darn pump.
 
Im all about the injectors but there not going to work in my 03, this is the 4th set Iv seen on here thats for 4 1/2 and up.....
 
fordassassin said:
MP-8 and Flux 4's that cheap, yet nobody is biting? Whats the deal guys? MP-8 is adjustable on the fly with the knob.

As for CP3's, I know a lot of you guys buying dual CP3's need a darn pump.
Click to expand...

hahahaha, thanks joey.

Actually, I don't care if I end up keeping the pumps and the mp-8.

I'd like to move the injectors.

-jp
 
You must log in or register to reply here.
Back
Top