Twins ??

[01CumminsSport]

I am currently running an edge comp, smarty, superdragon flow injectors, bd rad, and a phat shaft 66/71/14.
I was wondering what would be a good charger to pair up with the phat shaft for a fairly streetable setup while also being able to make good power

 

[01CumminsSport]

what would be the best and cheepest way for me to either buy or build a twin setup or is there any one who you would reccomend talking to about a twin setup

 

[97crewcab]

Remember that twins are going to spool slower than the secondary as a single. That is something to look at when thinking about streetability.
The 66 is a pretty big secondary. I would think that you could put an S480 under it, but I am not sure whether that would be big enough. I would think you would be better off trading or getting your 66mm made into a 64mm. Then put it over an s480. There have been quite a few guys put that setup on their trucks with good results.

If you are willing to build it yourself you can get mandrel bent exhaust tubing 3", 3.5", or 4" and build your cold piping. Then use Sch40 4" for your hot pipe. Most of the flanges can be bought on ebay. You can also find your silicone adapters on ebay. The little stuff is what will nickel and dime you to death.

The most popular twin builder is Nathan at MPI.

 

[haloman]

S480 would work. But I am not sure the VP could lite the whole setup. Thats a lot of air for it.

 

[01CumminsSport]

ya i put one setup together on a 06 but he used the silver 66/12or13 with the s480 and it went good at the track i never got to drive it on the street though but he had way more fuel than i do.

im not to concerned with lag bec i can always spray it if i need to