oil-burner
New member
- Joined
- Jul 1, 2006
- Messages
- 318
I love my 96 CTD, but due to some unseen circumstances I need to do a house cleaning. The list is long, so bare with me.
thanks,
scot
12v motor complete, it's apart
p-7100 pump
12v block girdle
24v block girdle
snow performance stage 2 system, new box got wet,slight oxidation on pump
24v head, complete (rockers,stands)
24v valve cover
12v double valve cover-crank case breather (just the cover, need other parts to make complete)-new
12v single valve cover with oil fill (cap included)
12v injector lines,used,stock size,industrial coated shinny
24v 240-hp injectors, EDM'ed
24v cross over tubes, EDM'ed to .093
ats arc flow intake, black
grand rock 7" single stack, raw, slight surface rust,miter cut
Fass 150/180 @45psi pump, new, only mounted, fittings modified
BDS 3" coil spring spaces, only 1500 miles old
BDS double front shock kit,only 1500 miles old
Set of twins----top is a HTT 62/71-13ss,lower is a S-480 w/ compitition cover,rips lower turbo mount bracket for 12v,5" downpipe,4" hot pipe,4"cold pipe, has v-band clamps at all connections, very nice kit
12v head, has intake cut off
manual shut of cable kit for p-pump, new
10-lb NOS bottle, new
12v arp head studs, new
12v fluidamper w/ pin kit, new
35" procomp mud terrains on 16 x 8 american racing polished baja's, only 1500 miles old
7" STAXX clamp, new, mounted
24v BD 3-pc exhaust manifold, HEAVILY ported, new
Manton pushrods for 12v, none better
94-02 rear roll pan, steel, new
94-02 APC clear tail lights, new
12v & 24v cometic exhaust gaskets, new
Lazer cut delivery valves
Delivery valve holders EDM'ed to .093
Frantz by-pass oil filter kit w/ extra TP, new
coolant bypass adapter for back of block, gets t'ed into heater cooler line
misc 5" mandrel bends
thanks,
scot
12v motor complete, it's apart
p-7100 pump
12v block girdle
24v block girdle
snow performance stage 2 system, new box got wet,slight oxidation on pump
24v head, complete (rockers,stands)
24v valve cover
12v double valve cover-crank case breather (just the cover, need other parts to make complete)-new
12v single valve cover with oil fill (cap included)
12v injector lines,used,stock size,industrial coated shinny
24v 240-hp injectors, EDM'ed
24v cross over tubes, EDM'ed to .093
ats arc flow intake, black
grand rock 7" single stack, raw, slight surface rust,miter cut
Fass 150/180 @45psi pump, new, only mounted, fittings modified
BDS 3" coil spring spaces, only 1500 miles old
BDS double front shock kit,only 1500 miles old
Set of twins----top is a HTT 62/71-13ss,lower is a S-480 w/ compitition cover,rips lower turbo mount bracket for 12v,5" downpipe,4" hot pipe,4"cold pipe, has v-band clamps at all connections, very nice kit
12v head, has intake cut off
manual shut of cable kit for p-pump, new
10-lb NOS bottle, new
12v arp head studs, new
12v fluidamper w/ pin kit, new
35" procomp mud terrains on 16 x 8 american racing polished baja's, only 1500 miles old
7" STAXX clamp, new, mounted
24v BD 3-pc exhaust manifold, HEAVILY ported, new
Manton pushrods for 12v, none better
94-02 rear roll pan, steel, new
94-02 APC clear tail lights, new
12v & 24v cometic exhaust gaskets, new
Lazer cut delivery valves
Delivery valve holders EDM'ed to .093
Frantz by-pass oil filter kit w/ extra TP, new
coolant bypass adapter for back of block, gets t'ed into heater cooler line
misc 5" mandrel bends
