Upgrading HE351 for use in a twin setup

[Redneekgeek]

What needs to be done to use the HE351 from a 06 in a twin setup? I have heard of upgrading the comp wheel to a super40, but is that really all you can do with these turbos?

 

[12vriviera]

It pretty much has a super 40 wheel.
Port the internal wastegate and possibly the volute area of the turbine side..
Putting a spring style actuator on the gate helps as well..
That's about it, aside from a 450 dollar batmo wheel or an 1800 dollar fleece cheetah..

But introduce yourself in the newbie section while you are here.
Welcome btw!

 

[PRINCETON_JAKE]

any details/info on the spring style waste gate? im also hoping to put one on my truck soon

 

[12vriviera]

http://www.competitiondiesel.com/forums/showthread.php?t=130349
Try this for starters.. There its more to be had..

 

[wildman6bt]

I like this setup but need to rethink the bracket for the he351cw.

 

[12vriviera]

Yup, all you need its the tube, you can weld onto it whatever you want. I am about to redo mine so i can adjust it easier, i just don't have a drive pressure gauge to check it.

 

[wildman6bt]

Yup, all you need its the tube, you can weld onto it whatever you want. I am about to redo mine so i can adjust it easier, i just don't have a drive pressure gauge to check it.

I use a regular ol air pressure gauge I got at ace hardware. Put it in a steering wheel gauge pod on my 12v. Then if it soots up and won't work it only cost $10 instead of $60 for a boost/drive gauge.

 

[12vriviera]

I was going to pit one in for tuning and remove for everything else...
Just a plug and a gauge i already have