Used cam and head studs

[shortbusdriver]

Reground cam from No Limit Manufacturing. Ground on 7-7-13 from a used 24v cam. 181/208, .3015"/.3155" lift. Ran in my sleeper truck. Couple hours of run time on it. Ran with new tappets and zinc additive. Will come with spec sheet. $200 shipped.

Used ARP 425 head studs for 12v. Installed same time as cam. Couple hours of run time and only one torque on them. $200 shipped.

 

[lenahan05]

LSA?

 

[Knoberman]

I'll take the studs.

 

[johnfak]

2nd on studs

Sent from my SM-N900V using Tapatalk

 

[shortbusdriver]

LSA?

107

 

[shortbusdriver]

Studs sold.

 

[shortbusdriver]

Cam is also taped for Eat Soot's cam retainer. Retainer not included.

 

[PSD0389]

Does that cam require any reliefs in the pistons?

 

[shortbusdriver]

It should not, but that would depend on how many times your head is resurfaced, head gasket thickness, and if the block has been decked.

 

[PSD0389]

It should not, but that would depend on how many times your head is resurfaced, head gasket thickness, and if the block has been decked.

Sounds like I should be good then with .006 off my block, .004 off my head and a .010 over headgasket. Are you firm on the price?

 

[shortbusdriver]

Yes, that price is shipped. If I don't get that its going on the shelf. It will get used eventually.

 

[PSD0389]

Yes, that price is shipped. If I don't get that its going on the shelf. It will get used eventually.

Okay I'll take it. How would you like payment?

 

[shortbusdriver]

Cam sold

 

[Knoberman]

Looks good as usual, thanks lee!