valve springs, push rods an cam?

2

250sprayboy06

New member
Joined
Mar 9, 2009
Messages
66
on a twin turbo 07 5.9. (83mm over 66mm) w/ smarty, tranny, rail box, twin cp3's an 150/150 pump, would cam valve springs an push rods help? would it get more power? its a drag truck. would it these help any?
 
Yes.. BTW are you still running stock injectors? The cam will help broaden the power brand, quicker spool, and lower egts... You wont get a huge max hp increase.. It will bring on the power sooner..
 
Another thing.. There are numerous threads on cams.. You might try searching for your answers using the search feature.. I see that you have multiple threads started... People will get burned out reading every other thread on the first two pages are yours.. Seriously do yourself a favor and use the search feature, unless you like sarcasm.. Good luck
 
with just springs alone you would be helping your motor out tremendously, a cam is a great attribute to a strong motor and would help with your spool up and depending on where you want it setup could help you at different powerbands, stronger pushrods eh you dont need them but not a bad investment.
 
You must log in or register to reply here.
Back
Top