Vids and pics from my pull to carnage!! woo hoo!!

03f3507.3

03f3507.3

New member
Joined
Aug 2, 2007
Messages
1,585
Welp the BAMF is coming back down to a leveling kit after this weekend deffently too much power to be pulling with a 8inch lift haha sheered the pinion in half and destroyed my diff...:D heres a vid and a couple pics will have some carnage pics later! pull was more or less part throttle the whole time cant wait to get it set up right and kick some a** btw have my lift wheels tires trac bars and lots of other goodies for sale!



DSC_0162.jpg


DSC_0164.jpg


DSC_0172.jpg
 
wish i could made it! Started down the road and tow rig wasn't building no boost and running super hot egts, and oil was leaking from the turbonetics charger on it. Had a local shop install the turbo as I had a 4430 to get together last week. Get it home and tighten one clamp on turbo and that get oil leak stopped, but still no boost, then notice coolant resivor was black. It had some oil in it. Then unload truck and un hook goose neck from it. Then drain collant and flush it. Add fresh drive it some refill more, still no boost, go to looking some more Hot side IC pipe was just sitting in the boot and yanked it out by hand. Tighten it up and bam 30psi! take it for hot laps and check coolant and no oil in it. So i am thinking that shop had an idiot not pay attention and thought the coolant cap was oil fill. by the time got it all fixed was 4pm and wouldn't made it in time!

also ditch the sterling why at it, get a 14 bolt or dana 80
 
Last edited:
nope no machine and 30$ hook fee and single charger any size, drugs allowed, no hanging weight and any weight was the rules
 
Carnage

Ive never seen so many trucks break at one pull. Spent most of the night pulling axles so people could get home! I cant wait to see what the BAMF will do once its dropped down! House I wish you could have made it. Was looking forward to meeting you.
Luke
 
luke h said:
Ive never seen so many trucks break at one pull. Spent most of the night pulling axles so people could get home! I cant wait to see what the BAMF will do once its dropped down! House I wish you could have made it. Was looking forward to meeting you.
Luke
Click to expand...

Yeah lots of broken trucks ha but was deffently a good time! nice meeting you last night too luke! Cant wait to get my truck lower to the ground and see what it will do!
 
I don't think that it is because of the lift. My brother in law did the same thing to his Ford. I think it is the rear end. He broke pinion and shot it out of the housing and broke the diff also. I agree with House, go with a Dana 80. I think you would have too much torque for a 14 bolt. Good luck.
 
Yeah, lots of scattered parts being pick off the track last night. Luckly we managed to help everyone "limp" home! I think a well-equipped toolbox would be instore for the next one!:poke:
 
bubba2400 said:
I don't think that it is because of the lift. My brother in law did the same thing to his Ford. I think it is the rear end. He broke pinion and shot it out of the housing and broke the diff also. I agree with House, go with a Dana 80. I think you would have too much torque for a 14 bolt. Good luck.
Click to expand...

yes but none the less i think ill be better off with it lower to the ground gonna look into a dana 80tomro and already have the suspension half off lol
 
Butzdiesel said:
Yeah, lots of scattered parts being pick off the track last night. Luckly we managed to help everyone "limp" home! I think a well-equipped toolbox would be instore for the next one!:poke:
Click to expand...

yeah it was nice driving my over sized honda last night hahaha but next pull my trucks gonna be on a leveling kit, have new front and rear traction bars, bump stops, and probably a roll pan with the hitch moved forward and a weight bracket lol already started in on making it happen today lol
 
Sturgis, KY

I had a good time down there in sturgis didn't make it home til about 5:30 or 6:00 it was nice to meet you tyler and everyone else i met. That Truck ran pretty good i might add.
 
chrishndrsht said:
I had a good time down there in sturgis didn't make it home til about 5:30 or 6:00 it was nice to meet you tyler and everyone else i met. That Truck ran pretty good i might add.
Click to expand...

Nice meeting you too thanks again for the use of the tools! deffently glad somebody was prepared:bang anyways the truck did pretty well for feathering the hell out of the throttle and having a crappy suspension set up lol will be a bit more prepared for ts already got the truck a good ways torn down today:Cheer:
 
AWWW the vid was one truck 2 short. anyway looked like the trucks were getting a bounce at the end causing the breakage. also feathering the throttle like that is why you broke, you were loading and unloading the pinion(even though u were still moving)
 
Duster 5.9 said:
AWWW the vid was one truck 2 short. anyway looked like the trucks were getting a bounce at the end causing the breakage. also feathering the throttle like that is why you broke, you were loading and unloading the pinion(even though u were still moving)
Click to expand...

yeah had a lot of factors on the breakage but no worrys with the set up i should have for TS ill hopefully be able to keep the hammer down:rockwoot:
 
Good to meet all you guys. Thanks to HD performance for helping out the chapter members help limp the trucks home. Working on my pics and vids.

BTW the BAMF edition scared the crap out of me breaking loose with a buried speedometer. :bow:
 
You must log in or register to reply here.
Back
Top