VP twins help

[CUMMINS_power31]

New to the VP land. Looking at buying some twins. heres the setup im looking at getting for a good price. Would this be a good setup on a VP? Whats the biggest injectors I can run with these? Not much of a street truck just looking for as much powers as I can squeeze outa a VP. thanks

"top charger borg warner s363 w/ extended tip technology t4 foot have adapter for t3 to t4

bottom charger s480 t6 foot 1.32 a/r

source automotive 5 inch downpipe

hot pipe supplies including both flanges and elbow and clamp

have the 180 and 90 degree 3 1/2 pipe for the cold pipe just need intercooler pipe and is compete kit"

 

[bsmith]

New to the VP land. Looking at buying some twins. heres the setup im looking at getting for a good price. Would this be a good setup on a VP? Whats the biggest injectors I can run with these? Not much of a street truck just looking for as much powers as I can squeeze outa a VP. thanks

"top charger borg warner s363 w/ extended tip technology t4 foot have adapter for t3 to t4

bottom charger s480 t6 foot 1.32 a/r

source automotive 5 inch downpipe

hot pipe supplies including both flanges and elbow and clamp

have the 180 and 90 degree 3 1/2 pipe for the cold pipe just need intercooler pipe and is compete kit"

I would think as big as you want especially with a VP.

7x.015 or 6x.018 would be my guess.

 

[8UPRACIN]

I'm running MACH 7s with a 62/65-12 over a S475 but I do have dual external wastegates to protect the chargers. I daily drive my truck everyday. You could most like run a big injector and not have any issues.