Wanted S400

S

StainlessRRA

Advocatus diaboli
Joined
Oct 23, 2008
Messages
6,316
I'm looking for an s400 with a T4 foot for my twins set up, new or used. I would prefer a s475 with a 1.10 or larger housing. Let me know what you've got!

Thanks guys.
 
I was trying to find a slightly better deal, Forcedinductions is cheap for new but I'm still on a budget. That's why I was looking for used. I'll buy new only if I have to. It's the last part I need to pick up before twins can go in :evil:

Thanks for the help guys
 
No they were not, I think it will be hard to find a good cheap s400 with a t4 becuase most come with t6s so the ones you find that are t4 have been switched so they generally go for more.
 
StainlessRRA said:
I'm looking for an s400 with a T4 foot for my twins set up, new or used. I would prefer a s475 with a 1.10 or larger housing. Let me know what you've got!

Thanks guys.
Click to expand...

your problem is mostly the T4 foot. a 475/1.10+ is is near always a T6. Why NOT use a T6?:poke:
 
To bad you dont want an s400 with a t6 flange 1.32 A/R 88/96 turbine 75mm compressor and a polished cover.
 
TURBOLVR said:
your problem is mostly the T4 foot. a 475/1.10+ is is near always a T6. Why NOT use a T6?:poke:
Click to expand...

I want a T6, but I have BD R700 piping. Which means the large turbo needs a T4. I'd like to use and adapter but doubt I can. I might have to order a 5in down pipe and try it.
 
I don't think an adapter would help you out much. I think it would put the charger too low and the coldpiping would not work.
 
he may be able to fanagle it, BD doesnt use a rigid 1pc cold pipe. but it would definitely cause some alignment issues. I think for the price of the adapter, he could get the T4 cut off and a T6 flange welded on. still need a 5" DP, and BDs may not line-up with other kits DPs.
 
Really for the $200 difference I'm better off buying a T4 from ForcedInductions, and not hacking up my piping.
 
You must log in or register to reply here.
Back
Top