Water injection pump lube fluid?

GOT-Torque

GOT-Torque

is
Joined
Jul 2, 2007
Messages
5,284
What pump lube fluid is everyone running? And how much do you dilute it?

I seem to recall someone mentioning a NAPA brand fluid but can't remember what it was. 1 pint to 1 gallon of water.

Will be using a hydraulic pump at 1000 psi for the new system.
 
Napa water soluable cutting oil 765-1526. According to Scott, available in pints, gallons or 5 gallon buckets.
 
joefarmer said:
Napa water soluable cutting oil 765-1526. According to Scott, available in pints, gallons or 5 gallon buckets.
Click to expand...

Thats what I have been running in mine and it seems to work good. Jesse Did you end up with a pump and nozzles like mine?
 
I have been using the same as JoeFarmer. It does make the water look like milk however I would not try and drink it.
 
Well I stopped by the local NAPA today and picked up their one last bottle of cutting oil part # 765-1526. Apparently NAPA has discontinued them and can no longer order them either.

They had another brand available called "Sta-lube honing & cutting oil" part # SL2523 (for a one gallon jug). Do you think this would be equivalent?
 
Blackbumper said:
Thats what I have been running in mine and it seems to work good. Jesse Did you end up with a pump and nozzles like mine?
Click to expand...

Same pump different nozzles. Jerrod hooked me up. I should get the remaining parts by tomorrow so I can test it out and get it installed.
 
SL2523 is a CRC brand. Through CARQUEST it is $25.90 a gallon. Just for some pricing reference.

I've always liked CRC's products.
 
ride42 said:
SL2523 is a CRC brand. Through CARQUEST it is $25.90 a gallon. Just for some pricing reference.

I've always liked CRC's products.
Click to expand...

Can you tell if it is water soluable? All he could tell me was that it was honing/cutting fluid.

Thanks

EDIT: a goodle search revealed it is mineral oil based so it should be soluable in water...
 
Last edited:
I was using Carquest Water Pump/Anti-Rust lube which is what Haisleys recomended when I bought my kit from them. Turned milky and wouldn't rust my piping or engine parts if any sat in there.

RyanB
 
I use distilled water only and I add water lubricant at the rate of 6 oz to each gallon useing the NAPA/CRC Concentrated Radiator Anti-Rust and Water Pump Lubricant #095335


05335.jpg



http://www.crcindustries.com/hd/content/prod_detail.aspx?PN=05335&S=N


BBD
 
You must log in or register to reply here.
Back
Top