Water lines mods for twin turbos?

[9812VCTD]

I am in the processs of putting together a set of twins for the truck and was wondering if anyone has some pics of how they modified there water lines to work? Are you using different hoses that come off the heater core? Any info or pictures would be very helpful.

Thanks in advance,
Justin

 

[Willy91]

I left mine alone on my old setup, 40 over a 3b.

 

[Jeepinoveru]

I also left mine alone. They just hang there since manifold is flipped.

 

[97Dodgeram]

me too, only thing i did was rotate the one closest to the passeger side so it is above the other one now

 

[estrada5.9]

me too, only thing i did was rotate the one closest to the passeger side so it is above the other one now

yep same here and some zip ties to help support them:hehe: it works

 

[97singlecab]

me too, only thing i did was rotate the one closest to the passeger side so it is above the other one now

Thats all I did to.

 

[9812VCTD]

Thanks for the info guys....I ended up modifiying the water line that comes off the top front of the engine shortened it up some and left everything else alone..I tried to get the rubber hose off closest to the passenger side and gave up, I think the only way it was going to come off was with a razor blade and some choice words so I left it where it was.

Justin

 

[RamDave]

I just moved them out of the way and used zip ties on the first set I built. When I build a set for my own truck it will have braided stainless hoses and billet clamps. :rockwoot:

 

[97Dodgeram]

haha the way i did it works fine, without zipties

 

[RamDave]

haha the way i did it works fine, without zipties

I'll look in to doing the same when my brother in law brings his truck back to my shop for some fine tuning. Delivery valves should be here next week sometime.