Water lines on Garrett BB charger.

[RonA]

Anyone have pictures of where they tapped into the coolant system?

 

[aer212]

I will later this week as my pickup is in the shop. But I do have a 6.7 with a watercooled turbo from the factory.

 

[dvst8r]

I don't have pictures, or that setup anymore, but I just taped into the heater core loop. Worked well in the mild climate I was living in at that point, don't know how well it would work where I live now.

 

[Signature600]

I came off the heater core loop as well...from the heater core through the charger back to the lower rad hose, just like factory.

Thought you were selling the BB Ron?
Chris


You can kinda see here:

 

[dvst8r]

My setup looked just like that, but just normal heater hose wrapped in a heat sock where it crossed over the manifold and went to the charger, and about 10" out from the outlet side of the charger. I was too poor at the time to afford cool AN stuff.

 

[aircop]

Garrett water lines

Ron hope this helps.

 

[RonA]

Thank you both for the pictures.

Chris.
I can only sell if someone will buy. I didn't get any nibbles on my 64/71/16ss and didn't get any on the Garrett. Might as well try it if i can't sell it.

 

[Signature600]

Thank you both for the pictures.

Chris.
I can only sell if someone will buy. I didn't get any nibbles on my 64/71/16ss and didn't get any on the Garrett. Might as well try it if i can't sell it.

Price was right...I gave more than that for my GT4088R...sadly I can't help you out with it as I'm changing directions again with the truck.


Let me know if you need anything.
Chris

 

[aer212]

RonA, how much you want for the turbo? What size exhaust housing? Does it have the surge ring machined in the compressor housing? Pm me please if you want to get rid of it.