what else is needed?

A

aggieredneck12

In Training
Joined
May 16, 2009
Messages
51
ok so im finally getting to park my daily driver and turn it into the track truck it was supposed to be when i bought it. mods i have in mind include 5" tbo, 13mm head studs, fire ringed head gastet, 5kgs, 13mm injection pump, 150gph lift pump, full billet tranny, 64mm over expandable not sure what yet, 250 hp injectors, intake elbow. what else would be needed to hit around 1000HP???
 
Try two intake elbows. I think that makes a thousand.
 
Only problem I see with your setup is the 5" tbo. I'd like to see a 6" tbo with a setup like that, but that's just me.

And x2 in the dual intake elbows. A lot of "experts" will tell you that you can get by with only one, but I'm telling you from experience...you're gonna want that dual intake elbow setup. It's a pree-mo piece and you'll get all kinds of street cred when you pop the hood.

Sent from my DROIDX using Tapatalk
 
$$$$ !
 
Last edited:
Here you go. Take this to your local diesel shop. You're welcome.

1KHP.png
 
haha dual elbows is all its gonna take huh? yah i figured some kind of power adder would help, and of coarse cash is good. but seriously is what im thinking gonna get me anywhere close to that?
 
aggieredneck12 said:
ok so im finally getting to park my daily driver and turn it into the track truck it was supposed to be when i bought it. mods i have in mind include 5" tbo, 13mm head studs, fire ringed head gastet, 5kgs, 13mm injection pump, 150gph lift pump, full billet tranny, 64mm over expandable not sure what yet, 250 hp injectors, intake elbow. what else would be needed to hit around 1000HP???
Click to expand...

aggieredneck12 said:
haha dual elbows is all its gonna take huh? yah i figured some kind of power adder would help, and of coarse cash is good. but seriously is what im thinking gonna get me anywhere close to that?
Click to expand...

No. You may wanna do a little research. Is your 1000 mark on fuel only or are you wanting to use the juice to get there?
 
either or really. i know it may take a while because of the amount of $$$ this is going to take so im trying to get everything lined out and start looking at options on parts
 
You must log in or register to reply here.
Back
Top