What is a Rockwell 130?

JUNK.we put one in DESTROKED last season just before we left for Indy.made one hook and busted the pinoin shaft.Does anyone know if a 106 pumkin fit in the 130 housing.

Dale
 
i dont know about a rockwell 130, but i know there was a lot of beer drank friday night
 
I take it you guys made it home ok!! Next time :Cheer: were going to Rock Falls.
 
Wait a minute... You guys need to include me! You guys are all jumping around me. I live in dixon...
 
2wpuller said:
JUNK.we put one in DESTROKED last season just before we left for Indy.made one hook and busted the pinoin shaft.Does anyone know if a 106 pumkin fit in the 130 housing.

Dale
Click to expand...

Dale if memory serves me right it will. I know a 140 and a 106 have the same housing and axles because mine was originally a 140 and we put a 106 chunk in it. The pinions in the 130/140's are half the size of a 106. Dont wast your time or money unless you just need a housing and axles it's not going to last unless you pull on sand
 
wiltse: "the ugly one in the green hoodie"

ruben standing behind her pointing and saying " you mean this one right here"

i think i spit my beer on the table. sofa king funny
 
Just let us you when your comming down.. Party at my house after milledgeville pull..
 
DISTURBED said:
Dale if memory serves me right it will. I know a 140 and a 106 have the same housing and axles because mine was originally a 140 and we put a 106 chunk in it. The pinions in the 130/140's are half the size of a 106. Dont wast your time or money unless you just need a housing and axles it's not going to last unless you pull on sand
Click to expand...


do you know if the side gears between 16,19, and 34 are interchangeable? i've got a ''fast'' carrier with 16 spline side gears in it and would like to put 19 spline gears in the carrier to run some 19 spline axles i have.
 
Nope....

I have been only to about 12 truck pulls, participated in 1. Only time I was back stage. The only time I had a truck that could pull. I have met RAMICATOR and work with Wilcox's wife.
 
duramaxsandwich said:
do you know if the side gears between 16,19, and 34 are interchangeable? i've got a ''fast'' carrier with 16 spline side gears in it and would like to put 19 spline gears in the carrier to run some 19 spline axles i have.
Click to expand...

I dont see why they shouldnt interchange. as long as they were from the same series rear. I cant remember if the carrier in the 140 was the same size as the 106 or if it was totally different. When i found out it wasnt a 106 i sent the center section back to get a 106 on exchange. the bolt pattern on the 140/106 are the same and will slide right together
 
You must log in or register to reply here.
Back
Top