What nozzles for 66/74?

M

monster50iii

New member
Joined
Oct 9, 2011
Messages
141
I have a billet 66/74 from ed, what size nozzles would work good with this? Currently I'm using DDP 90's and am thinking of going up to 150s. Opinions?
 
I suppose it depends on what the truck is used for.
90's are big enough for street application IMHO.
 
I want an honest 650-700hp, but I dont want to get the nozzles too big so I cant tow. Tuning will obv. make a major difference in dd, and towing.
 
i have the same turbo on my 05, I used it with 90s and it was alittle laggy but pulled very hard and egts never got to hottt. Id say 120-150s would be perfect and plus u cant go to big or u will need to upgrade your cp3. With 90s, 66/74/14, arson kit and water meth i made 693/1183.
 
Last edited:
MINE PULLS LIKE A DREAM.. and thats a 14k 28ft enclosed ttrailer. I feel like any bigger though and towing wouldnt be very much fun.
 
BTW: I talked to Chris at ED.. he said I would benefit more if I go to dual cp3's instead of enlarging nozzles.. So I am going to go that route.
 
I have towed about 8k with mine in the mountains. And saw 1350 a few times on steep grades.

Usually DD @ 70mph I'm at 800-900*. I'm running 120's. W/ 66/74/14.

End of the 1/4 I'm at 1450.
 
90 hp nozzles and a arson kit can make 650-700 with that 66 you don't need dual CP3's for that kind of power
 
You must log in or register to reply here.
Top