What rad hoses in OBS Ford conversion?

Mr. Bob

Mr. Bob

New member
Joined
Dec 8, 2006
Messages
187
I want to run a ford rad in my OBS/12V conversion, but the upper hose is on the pass side, not the drivers, and the lower on the drivers not the pass...

There is a different cummins uppper outlet that points towards the pass side? What about the lower hose? read about this:

36" SS flex Summit-390136
Adapter Summit-390001

Anybody have part numbers for the upper hose outlet if it exists? a hose?
 
First gen thermostat housing and hose should work for the top.
0614081823-1.jpg

I dont know about the bottom hose as the first gen has both hoses on the pass side. Rich
 
Early 1st Gens have them. In 91-93, it was a cross flow radiator, top was on the drivers side. Needs one from a NON-IC 1st gen.
 
Yes the truck in the pic was a non intercooled 89 but not any more.:hehe:
 
I guessed that from your signature...

Still need holp with lower hose!
 
The only way I can think of is to get a tight 90 at the rad then use a hard line to run to the other side . See the Crown vics the Police cars even have a cooler built into the crossover.Rich
 
You must log in or register to reply here.
Top