Who's got Block Fill

[RacinDuallie]

Looking to fill a block- anybody carry some ingredients for this recipe?

 

[TMONEYDIESEL]

Buy from Hard Blok

 

[RacinDuallie]

Buy from Hard Blok

Jeg's? How many to fill to the deck?

 

[9724VF350]

Get Moroso brand. flows alot better than hardblok. Get 4 jugs.

 

[RacinDuallie]

Get Moroso brand. flows alot better than hardblok. Get 4 jugs.

Is it a synthetic style fill?

 

[9724VF350]

not sure on that one, If I had to guess I'd say no considering it's been around for a long time and I don't think they've ever changed it.

 

[SuperSonic]

They are both grout based, but I've personally had better luck with the moroso brand. Summit sells a kit with 4 gallons for about 60 bucks.

 

[RacinDuallie]

They are both grout based, but I've personally had better luck with the moroso brand. Summit sells a kit with 4 gallons for about 60 bucks.

Best if done on a vibration table?

 

[9724VF350]

Probably, needle scaler works great too.

 

[RacinDuallie]

I'm thinking my air impact chiseler chucked in bench vise on my metal bench with the trigger ziptied :hehe:

 

[SuperSonic]

I have a small concrete vibe that I bolt to the deck and run for about 5min after its filled.

 

[RacinDuallie]

I have a small concrete vibe that I bolt to the deck and run for about 5min after its filled.

I don't have a concrete vibrator though....:hehe: Do you see any faults in my method planned?

 

[9724VF350]

I don't have a concrete vibrator though....:hehe: Do you see any faults in my method planned?

Soooo..... What kind DO you have? :hehe:

 

[SuperSonic]

Just go to the local adult store, im sure they would have a vibrator that could fill your needs.

 

[Delinquent]

Dumb question, but how do you plumb the water to run through the head only?

 

[SuperSonic]

Through the thermostat area and out at the back of the head at the large pipe thread port.

 

[Snedge]

Just go to the local adult store, im sure they would have a vibrator that could fill your needs.

:hehe:op: I dont even want to touch that one.


RD. You might want to let a machine shop handle portions of your build.

 

[Snedge]

No chit. I think thats best sometimes.

 

[RacinDuallie]

RD. You might want to let a machine shop handle portions of your build.

I have a couple of uncracked 53 blocks I wanted to play with ? :what:

Did you forget that I have International cast blocks for the P/M?

 

[RacinDuallie]

Dumb question, but how do you plumb the water to run through the head only?

Plumb the head at opposite ends and and run electric water circulator......