whos running a hx35 ht3b setup

0

01sport

New member
Joined
Sep 24, 2010
Messages
127
thinging about running a hx35 ht3b set up right now im running a 64/68/14 t-4i would really like something that spools quick thinking about trying a set of 6x.016s with this set up it is a vp truck just wanted some input
 
Last edited:
I know it's not exactly what you are looking for, but I run 62/71/14 over a BHT3B, running 7X.012s (and supporting mods) and the truck starts to pull around 1500RPM (has 10 lbs at 1500). If you're thinking of running that large of injector, An HX35 is going to hold you back quite a bit, IMO.
 
Last edited:
It's one of the most common twin setups on the street. Why? Because it works.
 
That is a lot of injector, but you'll probably be alright if you don't keep it floored everywhere you go.
 
My first twins were Dodgezilla(35/40 hybrid) over Bht3b twins. They worked great at the power level I was at(right around 500hp).
 
I just got done putting some 6x.016s in my vp truck and they put out a LOT of fuel. I think the only way a 35/3b setup would have the slightest chance at cleaning them up would be with no fuel box. With the box off they will black out the road if you aren't careful.
 
thanks alot for ur feed back i just want somethung that spools quick and makes 500hp
 
35 over 3b, or a 60mm s300 over K31(detroit 60 style) will do that and spool quickly.
 
I am running a 35/40 over ht3b right now and it would be your best bet to go a different route.
Unless you want to trade your 64 for my set up?
 
If you not stuck on the hx35 the setup I run spools real quick and will probably pull 500 horse. It does choke some on the top but drives great. You can swap a 351 straight up if the 341 seems to small and the 341's are fairly cheap to buy.
 
thinking of finding a he351 i want a really quick spool up just picked up a set of monster pump mike injectors 6x.013 with extra lift
 
You must log in or register to reply here.
Back
Top