WTB HX35W downpipe with clamp

[madmikeismad]

I really just need the flange with maybe a few inches of pipe left attached. It's the vband style.

 

[Racer9]

hx30 flange.

I think I have one, I''l take a look.

 

[madmikeismad]

Please and thank you!


Also, i need the compressor elbow and clamp! Forgot about that.

 

[Racer9]

Found a section of oem downpipe from the cast elbow, with about a foot of pipe, ball type flange.
I think I might have a 3'' to 4" short piece, with v-band flange, not sure about an extra clamp.

 

[madmikeismad]

Will it fit that?

It has to be short enough to snake over to the wheel well

 

[Racer9]

Have this flange, from an aftermarket 3" to 4" downpipe, that fit the turbo after removal of the cast elbow. You would need to remove what's left of the old pipe but could use the flange and new elbows/pipe to make whatever you need. It's a steel flange that fits inside the pipe. Don't have the clamp. Don't know why the pics aren't showing up, just click the link.
[ame="http://s114.photobucket.com/user/catrucker/media/16cm%20exhaust%20housing/1115142200_zps3b55e16c.jpg.html"]1115142200_zps3b55e16c.jpg Photo by catrucker | Photobucket[/ame]
[ame="http://s114.photobucket.com/user/catrucker/media/16cm%20exhaust%20housing/1115142200a_zps2772a5c5.jpg.html"]1115142200a_zps2772a5c5.jpg Photo by catrucker | Photobucket[/ame]
[ame="http://s114.photobucket.com/user/catrucker/media/16cm%20exhaust%20housing/1115142159_zpsf5dfb1ba.jpg.html"]1115142159_zpsf5dfb1ba.jpg Photo by catrucker | Photobucket[/ame]

 

[madmikeismad]

That looks right! Were they just a standard vband, or some special dealer only clamp? What year truck did the hx35w come on?

 

[madmikeismad]

I pm you

 

[SWALLDOG]

I've got one also if ya still need. Exh and intake elbow and clamps. The hx35 came on trucks from '94 - '02 depending on the model.

 

[madmikeismad]

Ok thanks.

I meant what year did the hx35w come on. My 98 had a different dp.

 

[Racer9]

I answered in PM, but mine is a '96. That year (and others) had a cast elbow and then the downpipe. The flange we're talking about was on a 3" to 4" downpipe that replaced the cast elbow, and attached right to the back of the turbo. I cut the flange off and used the 4" downpipe on the S300 I'm running now, which has a 4" turbo outlet.

 

[madmikeismad]

I think I got everything! Thanks guys.

 

[madmikeismad]

I lied, does anyone have that bit of 4" flexible tubing that was part of the stock intake?

 

[Macktruckdriver]

I do