well in the last 5 years of me owning my airdog 2 i have had to replace it 6 times
this last time it only lasted me 2 months.
one thing i can say about pureflows customer service is Jeremy will take care of you and they stand behind their warrenty
they have an upgrade it is the 4g hd pump since...
i have an airdog 2 165
at wot i see almost 30 psi drop in pressure is there anything i can do to fix this
plus i have replaced 3 pumps
voltage at the pump is 13.7
i have a turbine housing for a 63/68 it is a t3 divided housing with wastegate looking to trade for a .83 divided t4 housing with hx40 flange plus cash or will sell for 300 dollars
Need a little help
i am working on a 01 customer brought it in because it died on her
i scanned the truck with my solus pro and came up with the p1689
i first checked the relay it was good checked fuel pressure i had 15psi
was running fine and then it would start running bad and popping so i...
well i know im not the first build thread and not going to be the last just thought i would share it
i am starting this build with a 94 sclb that will be a short bed
got it gutted
got a 12 point cage from s&w race cars and a 5 gallon fuel cell from rci
got the cage painted
i will be...
Ok guys here is the deal Clifford (aka lostnwalmart) and i were reinstalling my twins on the truck today when we got close to being done i went to start the truck to get the chargers some oil the truck started to crank then stopped abruptly
put a battery charger on still nothing so we replaced...
ok all you drag racing gurus im building a pro stock diesel
9.00 to 9.99 class truck
it is a 94 sclb being converted to a sb
2wd :blahblah1:
trying to figure out the best tranny for it
i want to keep it simple but want to be able to hold the power
what are you guys running
Thanks in advance guys
will the control arms from a 94 1500 fit a 94 2500 i know the coils do building a pro street drag truck and wanting to run lighter control arms also going to a manual rack for it as well
Any help with this would be welcome
i have everything to do a nv4500 swap came out of a 94 dodge 2500
it is a 2001 nv4500 with upgraded input shaft and updated 5th gear nut
pedal assembly computer bell housing new clutch fork and pivot ball
valair 3600 dual disc with brand new heavy duty hydros
clutch has maybe 2000 miles on it...
ok guys been thinking about going to a 5k kit
i want pros and cons
and before anyone asks i already have valvesprings and an ati balancer so im covered in that retrospec
this truck is mainly a dd
I have been tossing around the idea of building a twin ram intake
do they do what they say they do or is it gonna be a waste of time
any thoughts on this would be very helpful
ok guys got a good question
i am running an ext gate on my twins set up. The heater core pipes are hitting the adapter is there any way i can remedy this so i can continue on cause i got frustrated and gave up today:nail: