Recent content by pstrang

  1. P

    FICM How To!

    Link to Article! http://www.competitiondiesel.com/ficm/FICM.pdf
  2. P

    AFE Stage2 Proguard7 Intake Kit for 6.0L PSD

    Was going to place on ebay, but I'll try here first. The kit is clean, used for only 20k miles, great shape, works perfect. Filter has been cleaned every 3,000 miles. The kit includes everything that originally came with 75-10392 and additions you see in the picture: * Stage2 Housing...
  3. P

    EGR Cooler Delete & More

    Howdy Guys, here's another long post to the forum that will hopefully help someone else. I pulled the top of my engine apart and did a number of things, most notably, the EGR Cooler delete. I didn't have any prior problems, just satisfying a little PMS that built up over the winter. :hehe: I...
  4. P

    Relative motion between engine and frame?

    Some of you may recall that I've been struggling with the 1800-2000 rpm droan/vibration ever since I got a MBRP 4" turbo back exhaust. I've had the TSB done on the turbo pedestal, aligned and re-aligned the exhaust dozens of times both hot and cold, added weights, clamps, tried w/ and w/o the...
  5. P

    Exhaust frustrations; comments?

    I've got a 4" turbo back MBRP exhaust, cat delete, and high flow muffler. I've always had the 1800-2000 rpm turbo droan; the TSB didn't help. It gets the floorboard humming pretty good, annoying. I checked if the exhaust was binded somewhere, no luck. Tried realigned things, no luck. I...
  6. P

    EGR Cooler ?'s

    I've got an 2005 with the scoup in the uppipe. I was replacing my intake elbow and noticed how gunked up my intake was. Even though my EGR has been disabled for 99% of engine life. Anyway, I got frustrated and had my neighbor weld shut my EGR. Since there isn't any more flow, are there any...
  7. P

    Fluidampr Installed on a 6.0L

    Hope this helps someone: I installed a fluidampr on my 2005 6.0L PSD. Just plain awesome! Highly recommended. I purchased mine from Dennis at ITP Diesel, same price as the others, but I got the replacement bolts AND a T-shirt! Sweet. Tools used: air impact wrench, torque wrench (50 ft-lb)...
  8. P

    SCT Custom Tune Vibration at Idle Issue

    I'm getting quite an engine vibration when parked at idle with the SCT/ID custom tunes. It's present in Park, Neutral, and Drive. I hear/feel it a lot more when I depress the brake pedal. It occurs with or without PI and with the economy and street tunes. No driving issues that I notice...
Back
Top