Been looking at bigger injectors for my setup. I see some companies offer “comp” injectors extrude honed with pintle work blah blah. My question is... why would I buy for example a 5x18 comp injector when I could just buy a 5x20 for cheaper? Motor is a 97 maxed 180 pump. Currently running a 5x14...
I just picked up a 64 Chevy c10 and I was thinking about swapping a om606 into it. I’ve done some research on building one for 4-500 horsepower and still have questions. Questions are
1. Is it streetable at all?
2. What supporting mods do I need (rods? Studs? Etc...)
3. What transmissions...
Truck is a 97 f250 eclb. Cummins swapped truck. Trying to setup a street truck that will also run the track occasionally. The rear end wraps really bad. It’s on stock leaf springs and 4” blocks from the factory. I have traction bars ready to mount up but I’m wondering if there’s anything else I...
So I set out to build a 700hp 12 valve to put in my 97 f250. Finally finished and I’ve been driving it now for about 700 miles. The truck is fast but at Wot it barely smokes (not a bad thing) so I feel like I can get a lot more power out of it. Egts are between 1300-1400 at wot and about 70 psi...
I have a 97 f250 with dual tanks and other than running a 60 gal aux tank I have I don't know any way to incorporate the dual tanks into a fass or airdog fuel system. Any other OBS fummins people have a solution that uses the stock tanks and diverter valve?