Search results

I havent been on here for along time. I am still running the old piers 40-16 over a borgwarner 3b-26 twins. They have been flawless for awhile but just lost the seals on the 3b. Anyway during the tear down I noticed the holset 40 ex housing is all cracked up around the foot. Do you know where I...

here is a pic with the washers installed on the raysbestos bushing

The entire front end is new parts on a project truck along with the new t-style upgrade. Old track bar with new bushings but with two different brands. Truck has some old but not completely worn out shocks. Has a level lift. Truck has no death wobble with stock e-rated Michelins. On purpose i...

i have evil twin cp-3s and the top pump just sprayed a quarter tank of diesel all over the ground before i could get it out of an intersection loaded with trailer. looks like the top steel line that goes from the rail to the top cp-3 has split. mine goes where the rail pressure sensor was on the...

i have noticed alot more injector solenoid failures lately, i called around and it seems they are just sold out or sent their cores back., The other thing is when they balance an injector, just how much difference in fuel could there actually be in clocking the solenoid? Thanks.

way smooth, they make make other springs feel like junk, i installed carlis six inch coils up front with matched bilstein 5100s inside the coil and bilstein 5150s outside the coil, i just need mini packs for the rear. The front rides awesome and the rear is like a lumber wagon probably because...

anyone that is changing a heater core, you dont have to pull the steering column all the way out or completely remove the dash, you can unbolt the column from its upper mount and just let it hang down onto the driver seat, it will also allow you to swing the passenger side of the dash out far...

why is there a quick coupler on the hydros? can you replace just the slave side, im not looking forward to spending another 300.00 for the whole thing, i have a 3850 double disc. thanks

okay fifth gear 4 low launch and at 100 ft my front driveline explodes, what are you guys running for front drivelines, this is with 33 inch bald 285-18s, i have custom drivelines, 3.2 pulling class, i took the lift off for the pulls so no angle problems it snapped off on the diff side, i see...

cat 793D, ENG derate issue .this is weird, low hour reman injectors, 10k hrs on engine, valve adjust done,3 of the four turbos new, truck keeps going into an engine derate while hauling240-280 ton, vims shows an ex temp split of 165 degrees, problem is when when you hook up cat et the truck...

i have approx 7k miles on my injectors, fass 200 at 15 psi the whole time and for the last 2k miles i am scared to even drive the truck out of town cause it seems i lose an injector solenoid every few hundred miles each time a different one, i have replaced three already. My parents are moving...

i need a top radiator hose that works, doesnt have to be pretty, has to work, i have evil twin cp-3 kit and the hose randomly touches the belt and is rubbing a hole in the hose :thankyou2:

my neighbor asked me to look at his truck, he said it keeps dying at stoplights, wont start without ether and wont idle for very long, he got it started while i was there and the exhaust is real clean, no smoke and smells okay, it is bone stock and has a brand new fuel filter in place, i pushed...

anyone running their 64/475 twins

why is my truck eating injector solenoids, 3 in twelve months every time is a diff cylinder, II 63lpm BFI's :nail:

well while replacing the injector solenoid i decided for whatever reason that i was going to move the body snap ring down so i could remove the inj hold down because i broke the roll pin before and so i used a hooked o-ring pick as i clearly did not use the correct tool, the pick slipped and...

Thank you Todd. I had an injector solenoid go out and Todd jumped in and sent me two just in case i break one, i will be sending you two rail relief valves to be modded back with the unused solenoid and the bad solenoid, thats pretty damn good customer service, thanks to TCDIESEL:Cheer:

i dont know much about coilovers, pure performance has a bolt in system, but i would rather have a dual rate set up, i pretty much want it to ride like a caddy on pavement but still be able to just pound down a rough road without my teeth falling out and my kidneys bleeding, right now i have an...

they are great for not rubbing the velvet off your archery buck when hauling him in your ram

well my friend says he had a blown head gasket so i pulled the head off his bone stock truck and found #3 toasted with a cracked cylinder wall, he has 168k miles and just had so called new injectors installed about 1k miles ago, he was pulling out a stuck ford and he says it shut off and wouldnt...