6point6
Got Smoke?
- Joined
- Apr 23, 2006
- Messages
- 343
I'm installing it on my 06 and just want to make sure I'm getting the wires right on the sensors.
Crankshaft sensor - white wire connected to the wire towards the front of the truck (crank sensor is sideways with the wires in a line. I put it on the front wire) (I'm getting a 61 rpm reading at all times reading so something isn't right here)
Fuel press - purple wire connected to the wire toward the driver side (reading around 600 at idle
Map - connected to the middle wire on the sensor.
Please help me out guys. Thanks!
Crankshaft sensor - white wire connected to the wire towards the front of the truck (crank sensor is sideways with the wires in a line. I put it on the front wire) (I'm getting a 61 rpm reading at all times reading so something isn't right here)
Fuel press - purple wire connected to the wire toward the driver side (reading around 600 at idle
Map - connected to the middle wire on the sensor.
Please help me out guys. Thanks!