1000 hp single

SMOKIN-U said:
it is an s480 to be exact and i was told with the race cover it would flow around 120-125# but i could be wrong thats just what i heard. what size is the gtx4202?
Click to expand...

Here is the map for the BW480 WITH the race cover....
 

Attachments

  • 480compmap.jpg
    480compmap.jpg
    105.4 KB · Views: 0
SMOKIN-U said:
what do they have thats comparable to the 480?
Click to expand...


GTX4708, or you could do the BW480ET-R. Which is our new comp wheel in a 480....flows 135lbs/min. Also the ET-R 80mm comp wheel weighs 50 grams lighter then your current 80mm.
 
DRTurbo said:
Yeah the 83mm turbine and 80mm comp wheel is a bit underdriven. The 80mm comp wheel likes turbine flow around 45-50lbs/min on the turbine side. The 83 simply can't flow that. The 83mm turbine with a 1.25A/R flows a shade over 44lbs/min. The 87mm turbine wheel is needed to fully drive the wheel.
Click to expand...

No doubt fully agree there. Currently have a 80/88 with the 1.32 housing as a single wich is much better but would never work for a standard cr setup.
 
DRTurbo said:
GTX4708, or you could do the BW480ET-R. Which is our new comp wheel in a 480....flows 135lbs/min. Also the ET-R 80mm comp wheel weighs 50 grams lighter then your current 80mm.
Click to expand...

Badass turbo for sure. I need to try one out here, when I get the time.
 
Scorpiont said:
Badass turbo for sure. I need to try one out here, when I get the time.
Click to expand...

Let us know. The S400's with the ET-R 80's are becoming hard to keep up with. Most are actually going to the Caribbean of all places. RX7 Rotary guys :ft:
 
DRTurbo said:
Let us know. The S400's with the ET-R 80's are becoming hard to keep up with. Most are actually going to the Caribbean of all places. RX7 Rotary guys :ft:
Click to expand...

Ive actually been talking to a friend to get one on his 7. When you guys start machining the smaller wheels I will definitely be able to use those.
 
You must log in or register to reply here.
Back
Top