Opinions on injectors and Turbos.

J

JHealy1979

New member
Ok so here's my plight.
Have an 06, was running a 6.7 with an s468 and 115% injectors. Cracked a cylinder and ended up picking up a nicely built 5.9 for a decent price.
I have the 115% overs that I was running in the 6.7 early cr nozzles and the s468.
The motor came with a set of Industrial injection Race 7 450hp injectors with less than an hour of idle time on them.
I'm thinking that they are way too much for my intended purpose. Towing with a bit of fun on the side.
Should I go back to the 115% and the s468 or is that too big of a single for the 5.9l to spool up while towing.
Not sure on the injector turbo combo.
Thanks for any help.
 
Red Sleeper said:
Which piston bowl is in the 5.9 engine? And what spray angle are the 115% injectors?
Click to expand...
The new motor has the early 03-04 qsb pistons and the 6.7 had the qsb pistons as well. The injector nozzles were set up to run on the 6.7 pistons so I think its the right nozzles
 
You must log in or register to reply here.
Back
Top