Opinions on injectors and Turbos.

JHealy1979

New member
Joined
Jul 4, 2022
Messages
16
Ok so here's my plight.
Have an 06, was running a 6.7 with an s468 and 115% injectors. Cracked a cylinder and ended up picking up a nicely built 5.9 for a decent price.
I have the 115% overs that I was running in the 6.7 early cr nozzles and the s468.
The motor came with a set of Industrial injection Race 7 450hp injectors with less than an hour of idle time on them.
I'm thinking that they are way too much for my intended purpose. Towing with a bit of fun on the side.
Should I go back to the 115% and the s468 or is that too big of a single for the 5.9l to spool up while towing.
Not sure on the injector turbo combo.
Thanks for any help.
 
Which piston bowl is in the 5.9 engine? And what spray angle are the 115% injectors?
 
Which piston bowl is in the 5.9 engine? And what spray angle are the 115% injectors?
The new motor has the early 03-04 qsb pistons and the 6.7 had the qsb pistons as well. The injector nozzles were set up to run on the 6.7 pistons so I think its the right nozzles
 
Back
Top