Recent content by billybob7

  1. B

    shop clean out of 12v parts

    Shop clean out all 12v parts some stock some performance 2, 12v short blocks one is a 92 and one is a 95 / 800.00 each 1, stock 92 head with stock valves and springs/500.00 1, 95 head with heavy duty Hamilton springs and bigger valves and ported and polished and intake milled off work done by...
  2. B

    shop clean out of 12v parts

    Shop clean out all 12v parts some stock some performance 2, 12v short blocks one is a 92 and one is a 95 / 800.00 each 1, stock 92 head with stock valves and springs/500.00 1, 95 head with heavy duty Hamilton springs and bigger valves and ported and polished and intake milled off work done by...
  3. B

    07 6.7 won't start

    I have a 07 6.7 that will crank and not fire I have checked all the plugs and wires, and I have checked I have fuel to all the injectors. I am leaning to a electrical problem , the truck also has full H&S deletes on it. I am lost on this one. Thanks
  4. B

    Over heating 6.7

    HELP HELP I have a 07 6.7 with H&S tuner and full deleted i have put a new water pump in and thermostat in. The truck is still over heating i also did a leak test to see if it was the head gasket and it said that the head gasket was good any help would good thanks
  5. B

    pulling drive line

    pulling drive line -------------------------------------------------------------------------------- i have a nv4500 rebuilt with 4 hooks on it it has the big input for a south bend DD with bellhouseing= 2000.00 south bend DD clutch has 4 hooks on it never used on the road= 1100.00 tcase...
  6. B

    pulling drive line

    i have a nv4500 rebuilt with 4 hooks on it it has the big input for a south bend DD with bellhouseing= 2000.00 south bend DD clutch has 4 hooks on it never used on the road= 1100.00 tcase 241dhd stock worked when it was pulled out of a running truck never pulled=700.00 tcase 241 dld need to...
Back
Top